bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about American Coach American Eagle Motorhome


  • Replacement Motor for 42 Series Kwikee Electric Step
  • The correct replacement motor for your 42 Series Kwikee Electric Step is the Lippert Components Kwikee Step Motor part # LC369506. The 25 Series and 42 Series use the same motor which is why this particular motor is listed for a 25 Series but it will work on your 42 Series as well.
    view full answer...

  • Replacement Steps for 2006 American Coach American Eagle Motorhome
  • The # LC3722616 replaces electric steps and motor for existing Kwikee control unit and switch kit. If your 2006 American Coach American Eagle Motorhome has a Kwikee 32 series RV steps, this is the part you need. Please look over the currently installed steps to identify what you have and let me know if it is something different than the 32 series.
    view full answer...

  • Replacement B Linkage for Kwikee RV Steps
  • It sounds like you're looking for the Replacement Gear Box and B Linkage for Kwikee Electric RV Steps # LC379161. This includes the gearbox and the linkage so you should be good to go for your Kwikee 28, 31, 37, or 39 steps!
    view full answer...

  • Replacement Breakaway Pin and Cable for Demco Air Force One
  • For the replacement pin you need the Replacement Breakaway Switch Pin for Demco SBS Supplemental Braking Systems # SM99905. This will work with the breakaway on your # SM99243. For the cable you can use the Roadmaster # RM-8603. The cable that came with your Air Force One is 7' long and this extends to 8' long so you should have plenty of slack.
    view full answer...

  • Fantastic Fan Lift Motor Replacement
  • You aren't restricted here the Replacement 17-rpm Lift Motor for Fan-Tastic Vent part # FVK6010-80 version will work out great for you as long as you reverse the wires when hooking it up. Here is a note about that from them. "If your fan is of a lower rpm or manufactured before 2014, this motor will still work, but you will need to cross the wires. For example, instead of red to red and black to black, you will need to connect the red wire to the black wire and the the black wire to the...
    view full answer...